Ford Ecoboost Wet Belt (Timing Belt) Replacement at Andrews Car Centre, Lincoln
Ford EcoBoost Wet Belt Replacement in Lincoln
At Andrews Car Centre in Lincoln, we carry out specialist Ford EcoBoost wet belt replacement using genuine Ford parts and a comprehensive replacement process designed to address more than simply the timing belt itself.
Ford wet belt systems require considerably more care than a conventional external timing belt. As the belt operates within the engine oil, deterioration can introduce belt material into the lubrication system, potentially restricting the oil pickup and affecting engine oil pressure.
Our technicians have extensive experience carrying out Ford wet belt replacements, including inspection and cleaning of the engine lubrication system as part of the job.
What Is a Ford EcoBoost Wet Belt?
Unlike a conventional timing belt that operates outside the engine, a wet belt runs inside the engine and is lubricated by the engine oil.
The belt synchronises the crankshaft and camshaft so that the internal engine components operate at precisely the correct time.
Over time, the belt can deteriorate. Small particles of belt material can then circulate in the engine oil and potentially accumulate within the oil pickup strainer or other parts of the lubrication system.
A deteriorating belt can contaminate the engine oil system before complete belt failure occurs, which is why checking and cleaning the oil system forms an important part of our replacement procedure.
Watch a Ford EcoBoost Wet Belt Replacement
Take a look behind the scenes at one of our Ford EcoBoost wet belt replacements at Andrews Car Centre.
What's Included in Our Ford EcoBoost Wet Belt Replacement?
Our Ford wet belt replacement process goes beyond simply fitting a new timing belt.
Genuine Ford Wet Belt Parts
We use genuine Ford wet belt components for Ford wet belt replacements.
Sump Removal
The engine sump is removed so the oil pickup and lower engine area can be properly inspected.
Oil Strainer Cleaning
The oil pickup strainer is inspected and cleaned to remove any accumulated wet belt debris.
Oil System Inspection
Relevant engine oil filters and lubrication-system components are checked for contamination where applicable.
Wet Belt Kit Replacement
The timing belt and associated components are replaced using the correct timing procedures and locking tools.
Oil Pump Belt
Where fitted as part of the engine design, the oil pump belt is replaced as part of the repair.
Auxiliary / Drive Belts
Associated drive belts are replaced where required as part of the wet belt procedure.
Oil & Filter Service
Fresh engine oil and a new oil filter are fitted using the correct oil specification for the engine.
Coolant & Final Checks
Where the cooling system has been opened, coolant is replenished and correctly bled before final checks.
Diagnostic Scan
The vehicle is scanned following repair to check for relevant stored or returning faults.
Road Test
The vehicle is road tested and checked following completion of the repair.
Leak & Level Checks
Oil and coolant levels are checked and the repaired areas inspected before the vehicle is returned.
Wet Belt Debris & Blocked Oil Strainers
One of the problems we regularly look for during a Ford wet belt replacement is deterioration of the belt introducing material into the engine oil.
This material can collect around the oil pickup strainer. If the strainer becomes heavily restricted, the engine may struggle to maintain adequate oil pressure.
For this reason, sump removal and strainer cleaning are included as part of our Ford wet belt replacement process.
Where further contamination or engine damage is found, we will explain the findings and advise what additional investigation or repair may be required.
When Should a Ford EcoBoost Wet Belt Be Replaced?
Ford wet belt replacement intervals vary depending on the engine, model, age and vehicle specification.
Rather than using one mileage or age figure for every EcoBoost engine, we recommend checking the correct schedule for the individual vehicle.
You should consider having the belt checked if:
- Your vehicle is approaching its manufacturer replacement interval.
- The vehicle's wet belt replacement history is unknown.
- You have recently purchased the vehicle without clear service history.
- There are signs of belt deterioration or contamination.
- An oil pressure warning or relevant fault has occurred.
- A technician has identified belt deterioration during inspection.
Contact us with your registration and we can help identify the engine and advise on the appropriate replacement schedule.
Signs of a Ford Wet Belt Problem
Wet belts do not always provide obvious warning before deterioration, but possible signs of a developing problem can include:
Oil Pressure Warning
A restriction in the oil pickup or lubrication system can contribute to oil pressure problems and should be investigated promptly.
Visible Belt Deterioration
Cracking, swelling, fraying or other deterioration identified during inspection can indicate that replacement is required.
Engine Warning Light
Certain timing or oil-pressure related faults may result in an engine warning light or stored diagnostic trouble codes.
Unusual Engine Noise
Unusual noises from the engine should be investigated, although a deteriorating wet belt may not always be noisy.
Unknown Service History
If there is no evidence of previous wet belt replacement, checking the vehicle's age, mileage and schedule is important.
Oil Contamination
Belt debris found within the lubrication system can indicate deterioration requiring further investigation.
Ford EcoBoost Models We Work On
Wet belt systems have been used on various Ford EcoBoost engines across different model years and specifications.
Applicable vehicles can include certain versions of:
- Ford Fiesta EcoBoost
- Ford Focus EcoBoost
- Ford Puma EcoBoost
- Ford EcoSport EcoBoost
- Ford B-MAX EcoBoost
- Ford C-MAX EcoBoost
Engine design varies by model and year, so we recommend checking the vehicle registration or engine specification before assuming a particular Ford uses a wet timing belt.
Ford Transit & Ranger Wet Belt Replacement
We also carry out wet belt replacement on applicable Ford Transit, Transit Custom and Ranger engines.
These vehicles use different engines and replacement procedures to the smaller EcoBoost petrol engines, so we have a dedicated page covering Ford van and Ranger wet belt work.
Genuine Ford Wet Belt Parts
For Ford wet belt replacements, we use genuine Ford parts.
Wet belt replacement is a substantial engine repair and correct component quality, installation procedure, timing and oil specification are all important to the long-term reliability of the engine.
Our Ford wet belt replacements are backed by a 12-month parts and labour warranty, subject to the applicable warranty terms.
Ford EcoBoost Wet Belt Replacement in Our Lincoln Workshop
Below are examples of Ford EcoBoost wet belt work carried out by our technicians.
Ford EcoBoost engine being stripped for wet belt replacement.
Wet belt replacement in progress.
Ford EcoBoost wet belt repair at our Lincoln workshop.
Why Choose Andrews Car Centre for Ford Wet Belt Replacement?
Ford Wet Belt Experience
Our technicians regularly carry out Ford wet belt replacements and understand the additional checks involved.
Genuine Ford Parts
Genuine Ford components are used for our Ford wet belt replacements.
Sump Removal Included
The sump is removed so the oil pickup and lubrication system can be inspected and cleaned.
Complete Repair Process
Oil, filters, belts, timing checks, diagnostics and final road testing are incorporated where applicable.
Transparent Advice
If further damage or contamination is identified during the repair, we explain the findings before additional work is authorised.
Family Business Since 1929
A fourth-generation independent family business serving Lincoln and Lincolnshire.
Flexible Payment Options Available
A Ford wet belt replacement is a substantial maintenance job, so flexible payment options are available to help spread the cost.
To discuss the available options, call 01522 520747 or email service@andrewscarcentre.com .
Ford EcoBoost Wet Belt FAQs
What is a Ford EcoBoost wet belt?
A wet belt is a timing belt that operates inside the engine and runs in engine oil rather than being housed externally like a conventional timing belt.
Why can Ford wet belts cause oil pressure problems?
If the belt deteriorates, belt material can contaminate the engine oil and potentially restrict the oil pickup strainer or other parts of the lubrication system.
Do you remove the sump during a Ford wet belt replacement?
Yes. Sump removal and cleaning of the oil pickup strainer form part of our Ford wet belt replacement procedure.
Do you use genuine Ford wet belt parts?
Yes. We use genuine Ford components for our Ford wet belt replacements.
How do I know when my Ford EcoBoost wet belt is due?
Replacement intervals vary by engine and model. Contact us with your vehicle registration and we can help identify the relevant schedule for your Ford.
Can you replace Transit and Ranger wet belts?
Yes. We also carry out wet belt replacement on applicable Ford Transit, Transit Custom and Ranger engines using the appropriate procedure for those vehicles.
Related Services
Get a Ford EcoBoost Wet Belt Quote
If your Ford EcoBoost wet belt is due, the service history is unknown or you have concerns about belt deterioration, contact our team with your registration.
Andrews Car Centre
Sunningdale Trading Estate
2C Dixon Close
Lincoln
LN6 7UB
01522 520747
service@andrewscarcentre.com